Glossary(595)

Data that determines the size of the stitch (loop).

Stitch presser.

Of the points that make up the line, the points corresponding to the corners. Displayed as a large circle on the screen.

Width to which the carriage is reversed.

A weave structure data.

A single layered jacquard woven fabric made by combining multiple types of structure.

Pattern converted to number of stitches (pattern for drawing structure).

The area inside the option line.

A device that rotates and lowers the knitted fabric by pinching it between the front and back rollers. Equipped just below the needle bed gap. The knitting width and the pulling width are close to each other, and the knitted fabric is stabilized.

A collection of units (blocks) used in control data.There are a main routine and a sub routine.There are one main routine and up to 31 sub routines.

A stitch cam used in combination with the main stitch cam when creating 2nd stitch loop.

A simulation mode which provides the highest quality. It can achieve 3 dimensional appearance of structures. It takes longer time than other modes.

A sample of a fabric. It is used to check the texture and density of a knitted/woven fabric.

Giving the information of the reverse shape (fold line) to the pattern.

A device that rotates and lowers the knitted fabric by pinching it between the front and back rollers. Main roller and sub roller.

Data for operating the take down device.

Return the stitch motor and the racking motor to the origin position, and reset the carrier catching pin and cams and pressers in the carriage.

A component of the tension equipment that suppresses the yarn from being sent out by the tension disk when the carrier is reversed.

The tension of the buffer arm is automatically changed according to the yarn supply speed.

Components of the tension equipment that adjusts the yarn tension.