Glossary(595)

Detecting plate that senses winding of the knitted fabric.

Information about the type of fabric and the number of pieces required for one garment to be set for each pattern.

The amount of fabric needed for the production. Width X Length

A kind of yarn made by twisting two or three yarns of different materials, thickness, and colors, sometimes having thicker parts, or twisting nep into the yarn. The coloring, number of twists, etc. are designed uneven and varied. Novelty yarn / Decorative yarn.

Function to create a shaping pattern by entering the number of times of narrowing/widening.

Double stitches. Stitch overlapped by narrowing.

A reference diagram for feeding yarn on a knitting machine.Items are displayed during auto process.

Knitting technique to fill holes opened by stitch move or widening with other loops, etc.

To close the hole created by stitch move.

12 gauge or finer gauge

The display method of the yarn count can be selected from fraction or meter when registering into the Yarn list.

A line that is input at the finishing position when the seam allowance is formed. (If a check mark is added in [Finished Line] when registering the seam allowance.) A type of assist line, displayed in yellow green when [Always-display mode] is ON.

Putting extra yarns inside the product that come out of the product by knitting or by hand.

To dress patterns on a 3D model.

To adjust the dressing on a 3D model. There are some adjustment methods such as using various dressing functions, fixing pattern lines and points, and pulling the pattern.

To dress patterns on a 3D model.

Carrier part for fixing the yarn feeder.When attached to an intarsia carrier, it can be used as a normal carrier.

One of the auto process parameters settings.Setting of fixed rib data.

A sinker that acts on the yarn without moving.

To lay a product flat.