Glossary(595)

Knitting with one needle skipping. Coarse low gauge knitting is possible.Used in contrast to all needle.

Half Milan. Double jersey and front tubular or back tubular are repeated.

A device on a weaving machine that opens the warp yarns upward and downward so that the shuttle of the weft yarns can through.

The amount of cut at which point the knife goes up/down.

The amount of cutting can be adjusted with a cutting machine, and this setting is used for the purpose of preventing uncut parts.


(e.g.) If the heel/overcut at the starting point is 3mm, cutting starts 3mm before the pattern, and finishes 3mm over.

A pattern consisting of aright twill and left twill.

12 or finer gauge.

The part that hooks the yarn.

A pattern made of small broken or jagged checks.

An option for speed up 3D simulation in the SDS-ONE APEX series. It uses an extension graphic board for simulation.

A device that controls the amount of yarn feed so that the amount of knitting yarn is kept constant.

The i-DSCS device with a mechanism that automatically changes the tension of the buffer arm according to the yarn supply speed.

Plating knitting that uses LP and exchanges the main yarn and the plating yarn in the same course.

A device that measures colors of knitted fabrics, fabrics, printed materials, color swatches, etc., to input the colors into the system. It is used for monitor calibration (only for a recommended monitor) to create printer profiles.

Tuck with “in” of the direction of travel.

A pattern that has been made ready for cutting and sewing after the finished shape of the pattern has been created.

One of the auto process parameters settings.Specify the placement position of the carrier to be used.

Initialize the color pattern and setting pattern.

The weft yarn that is inserted into the base knitted fabric, or its knitting.

Narrowing type with double stitches on the inside of the knitted fabric.

To increase the knitting width by moving the loop from inside to outside.