Glossary(595)

C (52)
Display 52 - 1 of 20

  • C knitting

    A knitting method used for partially open parts such as V-neck. Used in contrast to tube knitting.

  • Cable pattern

    A twisted pattern made by crossing loops like a rope.

  • Calculate pitch

    A function used when the specific numerical value is not known when inputting the pitch in grading work.

    There are various pitch calculation methods, such as [Parallel line], which calculates the pitch so that the lines are parallel, and [Perimeter Match], which calculates the pitch that has the same dimensions as the base line.

  • Calibration

    To adjust the colors on each device; display, output and input. According to the calibration result, the system takes the color space of each device, device variations, color gradation into consideration. So that the colors stay consistent through the process. Reference website: https://www.eizoglobal.com/support/glossary/c/calibration/

  • CAM

    1. Automatic cutting machine

    2. Cutting data extension for SHIMA SEIKI’s cutting machine. Created by outputting the marking data with [P-CAM Output].

  • Cam

    Activates a needle, movable sinker, loop presser, etc.

  • CAM point

    A point that specifies the conditions for cutting.

    (e.g.) [Start Point], which is the starting point of cutting. [No-cut line], which prevents cutting of the specified line.


    * alias: special point

  • Cam route

    The path through which the needle on the back of the carriage passes.

  • Cardigan

    Rib knitting that alternately knits knit and tuck. Knitting alternately on one side is called half cardigan, and knitting alternately on both sides is called full cardigan.

  • CARR. DIST ADJ.

    One of the knitting adjustment settings. Settings for adjusting the carrier interval between the main yarn and the plating yarn during plating knitting

  • Carriage

    Device to control needles and carriers.

  • Carriage move

    To move the carriage to the opposite side by specifying the option line, etc.

  • Carriage sensor

    Sensor on carriage.

  • Carriage stroke control

    For knitting with unused systems, the carriage stroke is shortened.

  • Carrier

    Device for conveying knitting yarn.

  • Carrier position

    One of the auto process parameters settings. Specify the placement position of the carrier after fixed rib data knitting.

  • Carrier stopper

    Stoppers for stopping the carrier at both ends of the carrier rail.

  • Cast off

    Removing the knitted fabric from the needles or the knitting.

  • Center needle position

    Specify the point where color no. 10 is drawn on the pattern development as the center of the knitting machine needle bed.

  • Change Pattern Width

    Insertion/deletion function used for the pattern created by KnitPaint “New.”