Glossary(595)

Positional information for hitting the needles and pipes attached to the cutting machine.

A screen on the controller that confirms each information being knitted.

The driving pulley pinches the knitting yarn with the driven pulley and rotate to send out the amount of yarn required for knitting.

The driving pulley pinches the knitting yarn with the driven pulley and rotate to send out the amount of yarn required for knitting.

The loop coming off the needle.

The loop falling off the needle.

A device that automatically adjusts the stitch cam to keep the amount of knitting yarn amount in units of one course or one garment.

Setting not to measure yarn length with DSCS, i-DSCS, and i-DSCS+DTC device.

Knitting mode of DSCS.

Knit with DSCS accuracy of 100±1% or 100±0.5%.

A mechanism that automatically changes the tension of the buffer arm according to the yarn supply speed.

A carrier that is unnecessary but is used temporarily to make the knitting consistent.It is also used when performing sequential knitting with multiple data for different carriers.

Abbreviation of Drawing Exchange Format, a CAD data file format developed by Autodesk. This file format is often used for inputting pattern data into SDS-ONE APEX series from CAD data of other companies, and for outputting pattern data.

auto yarn carrier (SWG-XR, MACH2VS, SWG-N2)

Specification of the option line R1. Specifies that the specified range is repeated vertically.

The edge stitch of the knitted fabric.

Stretch yarn.

In the knitting machine controller [Yarn measurement] – [Mode], set the carrier to perform inlay.

A course other than the knit course with a pattern that has a transfer such as stitch move.

Needle without holding a loop.